Mining Grade CMC : Flotation agent and Pelletization binding agentMining Grade CMC can be used as selective depressants to prevent unwanted gangue minerals from floating. Mining Grade CMC shall make the flotation selection more cost-effective and efficient recovery of valuable minerlas.
Mining Grade CMC can also be used for binding iron ore or mine pellets to form uniform agglomeration with high resilient strength.
Benefits of CMC in Mining flotation and Pellets binding* Efficient recovery of valuable minerals: improvement of the concentrate grade,resulting in reduced smelting operation energy cost
* Aid the separation by selective depression of the gangue material
Benefits of CMC in pallets binding:* Lower dosage,while binding the iron power or dust into higher purity of pellets,and less silica content of the pellets.
* Form uniform pellets with high resilient strength,that shall show excellent stability in transportation and storage.
* Increase ore porosity,positively impact firing efficiency and leave no harmful residues.
CAS number: 9004-32-4
Packaging: packed in 25kg net multiply paper bags.
Storage: keep original packaging sealed,stored in water-proof,clean and dry conditions.
Shelf life: 2years after production stored as above requested
More product and detailed specs available upon request.Carboxymethyl cellulose is a light cream to white free flowing powder or granulate, that readily dissolves in water to form clear, viscous solutions.
Our designated CMC are particularly suited for use as binders and provide high strength to the unfired substrate at relatively low addition levels whiel producing excellent plasticity,good suspensions,uniform slurries and low residue upon firing.
Our CMC is used as the most efficient binders,thickeners and stabilizers in ceramic glazing to provide:
* Assisting in the formulation of stable glaze suspensions
* Tailoring the flow and application to the situation
* Directly controlling the drying rate of the glaze as it is applied
* Increasing the mechanical strength of unfired glaze surfaces
* Promoting uniform pigment dispersions for uniform color
We recommend low to medium viscosity CMC with typical addition level 0.1-0.5% against weight depending on the final desired characteristics of the glaze.
Besides glazing,our CMC can be used in whole process during ceramic production.
Recommend addition: 0.5%-3.0% on total formulation adjustable depending on desired characteristic of final product
More product and detailed specs available upon request. We dedicated to develop product to meet customer demand properly.
Company Profile
