Technical Data Sheet_CMC Detergent GradeCMC is one of the best active ingredient in detergent.It can prevent besmirch readsorption after washing due to the anionic cellulose of CMC repel to the negative charged besmirch,as well as effectively thickening solution and stabilize the detergent.
Brief Properties of our CMC for DetergentPurity:We supply both semi refined CMC and high purity CMC for detergent
Semi-refined CMC Purity: 55%-65%
High purity CMC Purity: 98%min.
High Degree of substitutionHigh degree of substitution smooth the rheology of the aqueous solution and give improved compatibility.
Typical viscosity range Typical viscosity of some grades are shown below.Additional types are available or can be tailor-made to meet customer product request.
| |
| Concentration,% |
mPa.s |
| 2 |
50-300
|
| 2 |
300-1200
|
Brookfield LVF,25ºC.Spindle & RPM maybe different in separate conditions.
Physical Properties of our Carboxymethyl celluloseAppearance White or light creamy white powder
Moisture Max.10%
Bulk density 550-1000kg/m
3PH(1%) 6.5-8.5
Rules & regulations:CAS: 9004-32-4
Packaging: packed in 25kg net multiply paper bags,shrinkwrapped on pallets or as per customer requested design.
Storage: keep original packaging sealed,stored in water-proof,clean and dry conditions.
Shelf life: 2years after production stored as above requested
More product and detailed specs available upon request. We dedicated to develop product to meet customer demand properlyCarboxymethyl cellulose is a light cream to white free flowing powder or granulate, that readily dissolves in water to form clear, viscous solutions.
Our designated CMC are particularly suited for use as binders and provide high strength to the unfired substrate at relatively low addition levels whiel producing excellent plasticity,good suspensions,uniform slurries and low residue upon firing.
Our CMC is used as the most efficient binders,thickeners and stabilizers in ceramic glazing to provide:
* Assisting in the formulation of stable glaze suspensions
* Tailoring the flow and application to the situation
* Directly controlling the drying rate of the glaze as it is applied
* Increasing the mechanical strength of unfired glaze surfaces
* Promoting uniform pigment dispersions for uniform color
We recommend low to medium viscosity CMC with typical addition level 0.1-0.5% against weight depending on the final desired characteristics of the glaze.
Besides glazing,our CMC can be used in whole process during ceramic production.
Recommend addition: 0.5%-3.0% on total formulation adjustable depending on desired characteristic of final product
More product and detailed specs available upon request. We dedicated to develop product to meet customer demand properly. 
Company Profile
