Product details
It used for plasterboard tapered finishing and texturing. Do not mix with other material.
1.Mixing 1kg jointing compound with 550ml water.
2.Apply the compound into any gap between the boards and fill the taper.Cut a piece of tape and press into the joint.cover the tape with the compound,and remove the redundtant,make sure the joint keep the same level with the surface,the first joint's width is 100-120mm.
3. After the first coat is set and and dried apply a further coat,extending 50mm to 60mm on each side.Ensure that the coat is tight and featured into the board surface.
4. Once the second coat is set and dried apply a final coat extending 50mm to 60mm on each side ,ensure that it is tight and featured into the board surface.
5.After the final coat is set and dried ,the joint should be lightly sanded using 120 gram paper held in hand or pole sander.
Packing bag size |
20kg per bag |
Setting time |
60-90 minutes |
Usage quantity |
0.5kg/sqm wall |
color |
White ,gray |
packing |
Nylon bag with anti moisture film |
Storage time |
12 months |