Introduction of small briquette machine
High efficient small briquette machine is an equipment which can press variety of coal powder, coal dust, coal slime, coking coal,coke powder, aluminium powder, iron powder, iron scurff, iron oxide skin, actived carbon, slag, gypsum, limestone, plastic, kaolin and tailings into ball.
The whole brqiuette working line including that:
1.Quantitive feed hopper
2.Adhesive feeder
3.Grinding wheel
4.Flat conveyor
5.Belt conveyor
6.Quantitive feeder
7.Belt conveyor
8.back conveyor
9.Ball press machine
10.Belt conveyor
11.Mesh belt conveyor
12.Belt conveyor
Working Principles:
1.This serial ball press used main motor to transmit the motive powder to speed reducer through the V- shape triangle belt and to main drive spindle through coupling, and then uses the main driven split gear to send it to the main driven spindle to make the two rollers fall into step(inverted running with uniform speed)
2.The passive roller is held by the piston of the hydraulic oil cylinder, the hydraulic systen completes the circuit and control valve in the hydraulic systen keeps the system pressure.
3.mateiral are entered evenly into the bunker of the forming machine through the rationling equipment and then poured into the breaker rolls evenly adjusted by the regulating sluice.
4.the breaker rolls of reverted running with uniform speed push a pressure force, from small tp big, on the material
5.the forming pressure maximized at the central sideline and diminished quickly after the material pass through the line
6.then material successfully complete the ball doffing
The final prodcution gives is smokeless, non-toxic, nopeculiar smell and environment protective, applicable to the outdoor or indoor barbecue with ventilation, as the heat very large, production time is twice more thatn traditional.
Requirements of raw material for ball press machine:
1.size of material:less than1mm, should be controlled between 30%-40%;
between1-2mm, should be 30-40%
the max size should be no bigger than 3mm, with 20%
2.moisture of material:should be in8%-12%
3.Not aloowed:slad ot other massive sundries with high hardnedd, or the roll and spindle will be demaged
4.agglomerant or other additives:should be prepared by users in accordance with coal type and the operating environment.
If you want to know more about the machine, please feel free to contact me.
Company Profile
