Coriolis Mass Flow Meter

Introduction
Coriolis Mass Flow Meters type of CX-CMFI are the leading meters for precision flow measurement. And with good reason, the meters offer the most accurate measurement available for virtually any process fluid, while exhibiting exceptionally low pressure drop. The meters offer direct mass flow, volume flow, density, and temperature measurement of liquids and slurries — Without the need for additional equipment, manual calculations, or estimations.
The meters are designed for unsurpassed performance in even the harshest operating environments. They have no moving parts, and any special mounting or flow conditioning requirements. Every meter is available with stainless steel wetted parts and a wide variety of process connections to meet your every need.
The meters carry hazardous area approval for P. R. China.

Principles of Measurement
The structure of CX-CMFI Coriolis Mass Flow Meters was consisted of a pair of bended tubes. The principle is to detect Coriolis force forced a pair of tubes from inner mass flow by fluid.
A new force— Coriolis force would be appear while two conditions met: (1) vibrating with normal frequency in a pair of bended tubes, (2) fluid flowing in tubes. This force was produced upon synthesis from vibrating force and flowing force by fluid in tubes. And tubes would be wresting symmetric the center line because the force forced. Two displacement sensors on sides of tubes detect the force and output electric signals. The signals regulated, mass flow directly produced.

Technical Specifications of Products

Titles	Technical Specifications
Mass flow accuracy	±[0.2% +(zero stability /flow rate×100%)]
Mass flow repeatability	±(1/2) ×[0.2% +(zero stability /flow rate×100%)]
Density range	0.2 g/cm 3 ~3.5g/cm 3
Density accuracy	±0.002g/cm 3
Temperature range	-60C-+200C
Temperature accuracy	±1C
Output of current loop	4mA-20mA
Output of frequency/pulse	0Hz-10kHz
Contactor capacity of a Batch Control relay	24V/0.1A
Contactor form	normal open