Specification: EN760 SA CS 1 89 AC H5
Conform with: AWS A5.17 F6A0-EL8 F7A2-EM12K
Applications:
Butt an flat fillet welding of miniature LPG tanks, ships, vehicles, agricultural implements, machinery,
boilers, bridges, structural steels.
Characteristics:
SJ301 is an agglomerated calcium-silicate type welding flux.
Metallurgical behavior: High silicon pick-up is obtained. When the manganese pick-up.
Grain Size: 10-60 mesh
Basicity: 1.0 (B||W)
Regularly shaped welds are deposited without reduction of area or interface notches. Slag detachability is
good. A short slag is produced, thus allowing circumferential welding on small-diameter work pieces without
the risk of uncontrolled slag. The production of large pipes (especially spiral pipe welding) is a typical
application for this flux. Relatively high manganese pick-up is obtained, thus allowing the flux to be used
with wires with a low Mn content.
As the bulk density is low, so is the consumption rate.
Damp flux should be re-dried at 300-350ºC for 2 hours. Rust, grease and moisture on the weldment
should be removed before welding.
| Chemical composition of the flux SJ301(%) |
| SiO2+TiO2 |
CaF2 |
Al2O3+MnO |
CaO+MgO |
S |
P |
| 30-40 |
5-13 |
25-30 |
5-10 |
≤0.05 |
≤0.05 |
Chemical Composition of Deposited Metal
| WIRE |
C |
Si |
Mn |
| EL8 |
0.05-0.10 |
0.35-0.50 |
1.2-1.5 |
| EM12K |
0.05-0.10 |
0.35-0.50 |
1.4-1.6 |
Mechanical properties of the deposited metal
| Wire |
Standard |
Yield Point
σs (MPa) |
Tensile Strength
σb(MPa) |
Elongation
δ5(%) |
Impact Value
AKV (J) |
| EL8 |
F6A0-EL8 |
≥350 |
≥420 |
≥22 |
≥40(0ºC) |
| EM12K |
F7A2-EM12K |
≥410 |
≥500 |
≥30 |
≥60(-20ºC) |
FAQ:
Q1: Can I have a sample for testing?
A: Yes, we can support the sample.
Q2: Can I add my logo on the boxes/cartons?
A: Yes, OEM and ODM are available from us.
Q3: What are the benefits of being a distributor?
A: Special discount marketing protection.
Q4: Do you have inspection procedures for welding wires?
A: 100% self-inspection before packing. We provide Quality Certification for every order.
Q5: Can we mix items in one 20ft container?
A: Yes.
Q6: Can I have a visit to your factory before the order?
A: Sure, welcome your visit of factory.
How to contact us?
Mr. Jacky-MIGHTY QINGDAO METAL MATERIALS CO., LTD.
Tel: +86-0532-66010291
Mobile: +86-15764260250
Add: Room 705, Building A, Heda Office Building, NO. 175, Tailiu Road, Shibei Strict, Qingdao, China
Company Profile
