Home » Products » Consumer Electronics » Battery & Charger » Rechargeable Battery & Charger
TitleProduct

43.2V 2A LiFePO4 Car Battery Charger

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Guangdong

  • Validity to:

    Long-term effective

  • Last update:

    2017-12-26 04:30

  • Browse the number:

    190

Send an inquiries

Company Profile

Shenzhen Green Digital Power-Tech Co., Ltd.

By certification [File Integrity]

Contact：Ms. Yang(Mr.)  

Email：

Telephone：

Phone：

Area：Guangdong

Address：Guangdong

Website： http://szgrnpower.byshaiwang.com/

Product details

G100-36F Smart Car Battery Charger for 38.4V LiFePo4 Battery
    • Specification
      Input: 100~240V
      Output: 43.2V 2.0A
      Charge Process: CC(pre-charge)-CC(bulk)-CV-cutoff
      Charger Indicator: With 20%~100% 4 LEDs Battery Meter
      Output Protections: Short-circuit, Reverse Polarity...
      Safety Approval: CE cUL Approved
      Size: 170 x 71 x 41mm (plastic)
      Suit for Battery: 38.4 Volt (12Cells) 2~12Ah LiFePo4 Battery Charger 
 












G100-36F family products are main member of Green Digital Power-tech Co., Ltd. It represents today's new technology for 38.4V 12 Cell LiFePo4 battery pack charging. G100-36F programmed 4 auto stages (Pre-CC-CV-Cutoff) charging process, It is designed for 3~25Ah LiFePo4 battery pack. Stage "Pre" is a pre-charge function for deep discharged battery pack, this is helpful for battery's cycle life. The pre-charge current is less than 1/3 C.C value. When the battery recovered by pre-charge small current, stage "CC" will give constant current charging, the charge current up to 90W. Then, "CV" stage is followed, the output voltage is limited on C.V value, until the charge current declined to 1/8 C.C. At this stage, the battery is charged completely and the charger will cut off output automatic.
Further, G100-36F can display the charging process, indicate the battery capacity from 25% to 100% timely. This is helpful for user.
For more safety, G100-36F will inter protection mode when the battery polarity reversed our the output connectors shorted. 
 
General Specification for G100-36F
Input Voltage: AC 100~240V 50/60Hz
100-240VAC, 50-60Hz
Input Current: Max. 1.6A
Max. 1.6A
Output G100-12F
C.V 14.4V
C.C 5.0A
Operating -20ºC~40ºC
Cooling No fan designing, natural convection. Do not cover the charger.
Charge process Auto 4 stages: Pre-CC-CV-Cutoff
Cut-off when charge finished.
Battery 38.4V 12 Cell LiFePo4 Battery-pack.
Size 170 x 70 x 51mm
Enclosure ABS+PC Plastic housing, inlet type C8 or C14
Weight 400g
 
 
 
How to use:
1.Connect the AC cord to the socket, The "power" lamp will light on solid. 
2.Connect positive charger clip (red) to positive battery terminal, the black clip to negative. (You can use other dc plugs to connect battery), the "25%~100%" lamps will light on flowing. If the battery polarity reversed or output shorted, "Warning" lamp will flashing, please check the setup.
3.Depend on the charged capacity, 25%~100% lamps will lights up solid sequence, until the battery is fully charged. Then you can power off the charger and disconnect the battery or you can charge a new battery if you need.
 
An example shows the duration of 80% state charged for an empty battery.
Battery capacity G100-24L
3.2Ah 1.5 hours
7.0Ah 3 hours
12Ah 5 hours
25Ah 10 hours